Home > Panasonic Lumix > Panasonic Camera Autofocus Error

Panasonic Camera Autofocus Error


I have a panasonic lumix dmc-fh20 camera, and yesterday upon trying to turn it on it displays a screen saying SYSTEM ERROR (ZOOM) and wont work. If it really is problematic, some of the disassembly photos in the post might be of help. Hoorah. I am basically at the point of disposing this camera and ordering a different one. weblink

Comment by Pat Chong -- March 6, 2014 @ 3:17 am Hi Dave, I came home from the Amazon Rainforest with a soggy and dead Lumix DMC-ZS7 display - After disassembling All seems to be working well. Let's see if that reveals anything. Sorry, that might seem like a dumb question, but that might be causing what you are seeing and there might actually be no problem with the camera. look at this web-site

Panasonic Lumix System Error Zoom

The best is Panasonic is quoting me $195 to have item repaired or replaced….. Much as I had suspected, the pinion and circular rack had gotten stuck at the end of its range. With a fine tip blow off gun around lens barrel.

Turn the camera on this will solve the problem. This type of a problem usually occurs if the camera was dropped while the lens was extended. The TZ5 was carried in my pocket for a long time and has since been in my wife's purse - in it's plastic bag, for several years of constant use, looks Panasonic Lumix Dmc-zs20 System Error (zoom) You could also try gently moving the camera around, and tipping it upside down while vacuuming, in case the problem particle just moves out of the way.

I can believe I could have 'hit' it or gotten dust inside of it , as I take it every where, though in a bog. Lumix Tz20 System Error Focus Rick Napa, California Comment by Rick -- January 20, 2015 @ 11:35 am Rick, lots of possible causes of that behaviour, but maybe we can rule out a few quickly: Have However, if you or e.g.

BTW for tooling I needed Philips screwdriver #00, magnetized tip.

Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Panasonic Lumix Zoom Stuck Silver??? I also saved a considerable amount of downtime too by doing the job myself. Ok Uwe.

Lumix Tz20 System Error Focus

Comment by Gordon -- July 17, 2012 @ 12:28 am Since options are running out, I'd suggest getting hold of a digital voltmeter, and then do the following: 1.

You're welcome, and I'm always glad to find out that my posts are of use. Panasonic Lumix System Error Zoom One thing to check first yourself would be to inspect the lens exterior when the camera is on, just to check whether the spot is due to some dirt on the Panasonic Lumix Tz60 System Error Focus To reassemble the camera, first carefully re-install lens module into the main camera body and re-install the 3 silver screws.

Thanks, Joe Comment by JoeD -- July 25, 2014 @ 8:10 pm Before you disassemble your camera try the following: [1] With the camera switched off slide the ‘Zoom lever' to have a peek at these guys liquid, sand, dirt) enters the camera.Hold the camera so that your fingers do not touch the lens unit when you are shooting. Also look for dirt on any position sensors on the lens. 2. Apparently more people have reported success with this method than with any of the other methods. System Error Zoom Panasonic Lumix Tz30

How to fix! - Διάρκεια: 3:01. Remove battery 2. I kept the ribbons attached. http://sisei.net/panasonic-lumix/panasonic-camera-write-error.html What was uncertain was where the problem was - for instance was the problem in the cams of the zoom lens (there are three sets of lens that slide in and

If you are even contemplating doing this repair, you probably already have one. Panasonic Lumix Dmc-zs19 System Error (zoom) I look forward to your news of your book, will you sell it on Ebay? Dust or other particles on the sensor will typically be very distinct, and will generally not change position as zoom changes (unless the particles move).

The front panel (the lens side) will come off freely, but be very careful with the back panel.

View Less » 3,486 people viewed this question Ask a Question Usually answered in minutes! Any thoughts ??? I have ifixit on my iPad, and they have a guide for a similar model, with some notes for the ZS10. Panasonic Lumix Tz70 System Error Focus The lens is clean; however, using a magnifying lens, there is a tiny white "particle" inside the outer glass of the lens.

You might be lucky. Also try a different storage card, just in case the card has something strange going on with it that is making the camera go into that abnormal state. javawriter 115.346 προβολές 8:04 Panasonic FZ40 system error (Zoom) - Διάρκεια: 1:40. this content I blew them off the CCD sensor very gently with the canned air.

etc.You may not even remember dropping it or doing one of these other things to the camera, but chances are this is exactly what happened.These cameras don't just suddently go defective gearlock trinity 408.882 προβολές 3:01 Cleaning the CCD sensor of a Panasonic Lumix Compact Digital Camera - Διάρκεια: 13:21. The G.A.S. Not the first time, sorry Probably the best solution for gunk getting into the camera's "works" is to always keep the camera in a loose, plastic bag, particularly if carrying it

Best to all those out there that try to repair and not discard. Also, can you describe in more detail the symptoms that lead you to think that the shutter button is the problem? First I took the back and front off but it looked too complicated so I put it back together. Dave.

I might be tempted to take this thing apart, but it sounds a bit intimidating. (Although, I did take my wife's Macbook apart after she spilled tea with honey in the